Used Cushion Tire Forklift BC - While forklift trucks are often classified by the type of work they perform under most circumstances, forklift trucks can also be classified by the type of tire they are fitted with. Pneumatic and cushion tires provide the 2 distinct forklift classifications.
There are drawbacks and benefits to both pneumatic and cushion forklift tire options. The benefits and potential drawbacks of the cushion tire models can only be compared when the pneumatic benefits and drawbacks are equally discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires are comprised of treaded or smooth, solid rubber which is positioned around and affixed to a metal ring or baseband. These kinds of forklift tires are cheaper to make and easier to maintain. Cushion tires are designed for smooth surface applications such as work that takes place mostly indoors or around loading docks. Cushion tires are also better suited to applications in tight spaces. This is because they offer a turning radius that allows for movement around tight corners. Cushion tires enable the forklift to be situated closer to the ground, increasing the vertical clearance in comparison to other models that rely on pneumatic tires. However, cushion tires do not provide as much traction as pneumatic tires. This is especially true for outdoor areas and wet surfaces.
There are many jobs suitable for cushion tire forklifts such as unloading shipments, transporting items to and from the loading areas, order picking, unloading inventory and more.
Pneumatic Tires
Pneumatic tires, on the other hand, are primarily designed to operate in rougher terrain, with uneven surfaces. These tires have two categorizations:
The solid resilient pneumatic tires are comprised entirely of rubber and the standard air pneumatic tires feature a layered rubber design filled with air.
Pneumatic tire forklifts are good options for work that takes place outdoors on unpaved ground. The solid resilient pneumatic forklift tires are best used in areas such as lumber yards or junkyards and construction sites where there may be sharp metal items on the ground which could puncture the tires.
Benefits of Cushion Tire Forklifts
Forklifts fitted with cushion tires are a good option for operation on smooth surfaces, both indoor and outdoor. The type of forklift that utilizes cushion tires are for mainly inside applications with some limited outside use. They are often designed for use in areas such as manufacturing plants and warehouses. Cushion tire models excel in tight locations including narrow aisles and accessing high shelves.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Since cushion tire forklifts do not need to house a larger internal combustion engine, they are more compact and easier to maneuver.
2) Lower Clearance
Forklifts built for indoor use with cushion tires generally have a lower clearance than pneumatic tire equipment, allowing the forklift to more easily navigate doorways and other obstacles such as lights and sprinkler systems.
3) Durability
Cushion tires for forklifts are durable, easy to maintain and have little to no risk of puncture.
4) Quiet
Because the majority of cushion tire forklifts are powered by battery or fuel cell, instead of an internal combustion engine, they are much less noisy than propane or diesel powered forklifts.
5) Environmentally Friendly
Again, because most cushion tire forklifts are powered by electricity, rather than an internal combustion engine, cushion tire forklifts produce no harmful emissions.
Forklift Tire Choice
The forklift frame typically depicts whether a cushion tire or a pneumatic tire will be utilized. The forklifts’ lifting capacity and frame are specific to the axles and tires in the design. Forklift manufacturers create models that safely operate with certain tires and wheels, typically pneumatic tires or cushion tires. Because of this, it is more useful to choose the best forklift type, considering the type of tires the forklift will require and how it fits the job application, rather than attempting to modify the forklift by choosing the right tire for the application.
Workplace Applications
Suitable Work Applications for Cushion Tires
Cushion tire forklifts are usually the best option for many workplace applications. If most of the transporting, lifting loads and placement happens inside or with limited outdoor use on smooth surfaces, cushion tire forklifts are your best choice.
Sitting closer to the ground, cushion tire forklifts have a tinier frame compared to pneumatic tire forklifts. This gives them better clearance for fitting through doorways and avoiding overhead obstacles. Although, cushion tire forklifts offer less ground clearance, this can cause damage to outdoor obstacles when the surface is uneven or unclear. One solution to this problem is to fit the cushion tire forklift with traction tires on the front of their forklifts. Tires that offer traction will perform better on wet surfaces, rough terrain, packed gravel and asphalt. Traction tires are not used on dirt or grass locations and need to be installed on opposite sides, the drive and steer axles.
One of the largest advantages of using a forklift with cushion tires is the smaller turning radius. This makes cushion tire forklifts ideal for warehouses and manufacturing facilities that have less space. Areas that are designed with narrow aisles such as warehouse facilities will enjoy the tighter turning radius offered with cushion tire forklift models. Pneumatic tire forklifts are more expensive and less available compared to cushion tire forklifts.
Suitable Work Applications for Pneumatic Tire Forklifts
Outdoor applications working on gravel benefit from pneumatic tire forklift models thanks to the air in their tires. Interior applications may use pneumatic tire forklift models although they will not provide the maneuverability, lower clearance or tighter turning radius. Pneumatic tire models create harsh fumes with their internal combustion engines, making them unsuitable for interior locations. Measuring wider and longer in comparison to cushion tire forklifts, pneumatic tire models are mostly utilized outside.
There are two kinds of pneumatic tires; the air-filled pneumatic tire is less expensive than the solid pneumatic tire. The solid pneumatic tire is comprised of solid rubber without any air inside, making this type more resilient against gouges or punctures. Solid pneumatic tires are commonly used in lumber and scrap yards where there are tons of sharp, metal debris including nails. Air-filled pneumatic tires work well on gravel and asphalt exterior surfaces. The main issue with air pneumatic tires is their ability to become gouged or punctured. Because of this, it is necessary to make sure the work area is free of any sharp objects before using forklift fitted with air pneumatic tires at that site. Air tires are also known to give a bouncy ride, contributing to operator discomfort and fatigue. It is possible to foam fill the pneumatic forklift tires for a smoother ride. Much less bouncy than air-filled pneumatic tires, the solid pneumatic forklift tires provide the operator with a smoother ride. Flat tires can be filled with foam to keep them more durable and prevent flats. It takes roughly three days to fill and cure an air pneumatic tire with foam.
Difference in Load Capacity
Both cushion tire and pneumatic tire forklifts offer similar load capacities. Some electric powered cushion tire forklifts do have lift limits. Pneumatic tire and cushion tire forklifts are available in practically any load capacity. These machines come in different load capacities from under 2000 lbs. to over 200,000 lbs. depending on your application.
Cushion Tire Forklift PDF
